* ggml : add GGML_SCHED_NO_REALLOC option to disable reallocations in ggml_backend_sched
Enabled in ggml-ci for testing.
* llama : update worst-case graph for unified cache
* ci : disable op offload in some tests
* fix spelling
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* Qwen3 Next - cleaned up version
* Whitespaces and stuff
* Correct minor errors
* Update src/llama-model.cpp
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@scala.com>
* Misc. fixes.
* Clean up code, add missing hybrid qualifier
* Did someone transpose the SOLVE_TRI result matrix? Perhaps...
* Whitespace
* Proper tensors for cb calls
* Use llama-graph.h vertical alignment
* BROKEN: chunking
* Set new tensors as inputs.
* Proper chunk logic
* It's the circle of life...
* More shenanigans for n_seq > 1
* Nail in the coffin?
* Fix Windows build
* Eh, one fails on Windows, the other fails on Mac... just use general capture.
* quant : cleanup
* model : cleanup
* qwen3 : cleanup
* cont : cleanup
* cont : cleanup
* ggml : revert change
* qwen3 : cleanup
* cont : cleanup
* Readd cmath
* qwen3 : fix typo
* Update convert_hf_to_gguf.py
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@scala.com>
* Usual suspects
* fix my bad suggestion
---------
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@scala.com>
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
This commit removes the `--backend-dist` option and instead uses the
configured --samplers chain to determine which samplers run on the
backend.
Backend sampling is still enabled using With `--backend_sampling`, and
the sampler chain, either explictly specified using `--samplers` or the
default, is automatically analyzed to determine which samplers can run
on the backend. The system finds the longest contiguous chain of
backend supported samplers from the start of the sampler sequence.
For example:
* If the chain is `top-k -> temperature -> top-p`, and both `top-k` and
`temperature` are backend-supported but `top-p` is not, then `top-k`
and `temperature` will run on the backend, while `top-p` and
subsequent samplers run on the CPU.
* If all configured samplers are supported, the final distribution
sampling will also happen on the backend, transferring only the
sampled token IDs back to the host.
* If the sampler chain starts with an unsupported sampler (e.g.,
`penalties`), all sampling runs on the CPU. Note that this is
currently the case with the default sampler so to use backend sampling
it is required to specify a sampler chain. See below for an example.
The following shows how llama-cli can be run with backend sampling:
```console
$ llama-cli -m models/Qwen2.5-VL-3B-Instruct-Q8_0.gguf \
--prompt 'What is the capital of Sweden?' \
-n 20 \
-no-cnv \
--verbose-prompt \
-ngl 40 \
--backend-sampling \
--samplers 'top_k;temperature'
```
In this case the all sampling will happen on the backend since both
`top_k` and `temperature` are supported backend samplers.
To enable a partial backend sampling (hybrid sampling), for example
running `top_k` and `temperature` on the backend and `typ_p` on the CPU
the following sampler chain could be specified:
```console
$ llama-cli -m models/Qwen2.5-VL-3B-Instruct-Q8_0.gguf \
--prompt 'What is the capital of Sweden?' \
-n 20 \
-no-cnv \
--verbose-prompt \
-ngl 40 \
--backend-sampling \
--samplers 'top_k;temperature;top_p'
```
If this looks good then I'll follow up with updates the llama-cli and
llama-server documentation to reflect these changes.
This commit adds the --kv-unified flag to the usage example
in the README.md file for the batched example.
The motivation for this is that without this flag the example will fail
with the following error:
```console
Hello my name is
split_equal: sequential split is not supported when there are coupled
sequences in the input batch (you may need to use the -kvu flag)
decode: failed to find a memory slot for batch of size 4
main: llama_decode() failed
```
* feat(llama-gguf): Print out the tensor type in llama-gguf r
Branch: Mamba2Perf
Signed-off-by: Gabe Goodhart <ghart@us.ibm.com>
* feat(off-topic): print the number of elements in tensors with llama-gguf
Branch: Mamba2SSD
Signed-off-by: Gabe Goodhart <ghart@us.ibm.com>
* style: valign
Branch: GGUFToolOutputs
Signed-off-by: Gabe Goodhart <ghart@us.ibm.com>
* Update examples/gguf/gguf.cpp
---------
Signed-off-by: Gabe Goodhart <ghart@us.ibm.com>
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
This commit modifies the script `run-org-model.py` to ensure that the
model configuration is explicitly passed to the `from_pretrained` method
when loading the model. It also removes a duplicate configuration
loading which was a mistake.
The motivation for this change is that enables the config object to be
modified and then passed to the model loading function, which can be
useful when testing new models.
* Add --embd-output-format raw for plain numeric embedding output
This new option outputs embeddings as raw space-separated floats, without JSON or 'embedding N:' prefixes. Useful for downstream vector pipelines and scripting.
* Move raw output handling into format handling section
* Move raw output handling into else-if block with other format handlers
* Use LOG instead of printf for raw embedding output
* docs: document 'raw' embedding output format in arg.cpp and README
This commit add the trust_remote_code=True argument when loading models
using AutoConfig, AutoTokenizer, and AutoModelForCausalLM for the run
original model script.
The motivation for this is that some models require custom code to be
loaded properly, and setting trust_remote_code=True avoids a prompt
asking for user confirmation:
```console
(venv) $ make causal-run-original-model
The repository /path/to/model contains custom code which must be
executed to correctly load the model. You can inspect the repository
content at /path/to/model.
Do you wish to run the custom code? [y/N] N
```
Having this as the default seems like a safe choice as we have to clone
or download the models we convert and would be expecting to run any
custom code they have.
* model-conversion : add support for SentenceTransformers
This commit adds support for models that use SentenceTransformer layers.
The motivation for this is that if converted model includes any of the
numbered layers specified in the original models repository then these
changes enable these models to be used and verified. Currently the
model-conversion only support the base model output without any of
the additional transformation layers.
Usage:
Convert the model that also includes the SentenceTransformer layers:
```console
(venv) $ export EMBEDDING_MODEL_PATH="~/google/embeddinggemma-300M"
(venv) make embedding-convert-model
```
Verify the produced embeddings from the converted model against the
original model embeddings:
```console
(venv) make embedding-verify-logits-st
```
The original model can be run using SentenceTransformer:
```console
(venv) make embedding-run-original-model-st
```
Run the converted model using "SentenceTransformer" layers whic
enables pooling and normalization:
```console
(venv) make embedding-run-converted-model-st
```
* add model-conversion example requirements
* add support for -st flag in embedding model conversion
This commit add support for the -st flag in the embedding model
conversion script. This will enable models to be converted using
sentence transformers dense layers.
* devops: move s390x and ppc64le ci build
we have access to ubuntu-24.04-s390x and ppc64le images now
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* devops: disable ppc64le for now since they have compiler errors
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* devops: stop warnings as errors
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* devops: switch to non-macro flag
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* devops: going the llama macro route
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* devops: add big-endian gguf test models
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* devops: disable ppc64le to test s390x, check test build
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* devops: dup .gguf.inp files for big-endian tests
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* devops: dup .gguf.out files for big-endian too
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* devops: add python setup and endian byteswap
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* devops: pooring thing does not have s390x python3
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* devops: add missing rust compiler for s390x
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* devops: try rust actions runner
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* Revert "devops: try rust actions runner"
This reverts commit 3f8db04356033d6c1d7eccc75ca396bc5298250c.
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* devops: try a different path for rust
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* devops: dump home directory and user info
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* devops: install gguf-py only
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* devops: missed relative path
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* devops: remove big-endian files since local swapping is working
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* devops: revert test-tokenizer-0 cmakelists
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* Fix unicode flags conversion from and to uint16_t
Bitfields are allocated in different order on s390x
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* Simplify byteswap command
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* Add byteswapping and git-lfs for test-tokenizers-ggml-vocabs
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* Fix endianness detection in vocab loader
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* Disable test-thread-safety on s390x
In this test a model is downloaded,
then immediately loaded to check if more downloads are needed,
and then used for test.
There is no clean way to separate all those steps
to add byteswapping between them, so just skip this test.
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* Fix q8_0 test in test-quantize-fns
vec_signed uses unexpected rounding mode.
Explicitly use different rounding function.
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* devops: add big-endian stories260K
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* devops: add s390x test-eval-callback
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* devops: fix test does not exist
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* devops: fix model not found llama-eval-callback
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* Fix q3_K dot product error in test-quantize-fns on s390x
Array q8bytes had only 4 elements allocated, but 8 elements accessed.
This lead to write out of bounds and later read of overwritten values out of bounds
and incorrect result.
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* devops: re-enable ppc64le for testing
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* devops: activate test-thread-safety for s390x
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* devops: disable ppc64le tests
for some reason it keeps failing test-thread-safety tests and I do not
have a machine that is able to replicate the tests.
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* devops: LLAMA_FATAL_WARNINGS=ON
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* Correct repository URL for s390x for test-thread-safety model
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* Fix fs_get_cache_directory
Ensure it works even if both XDG_CACHE_HOME and HOME are unset.
This might happen in containers.
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* Re-enable CI for ppc64le
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* Fortify ggml_rope_impl
Only memcpy data from sections argument if it's non-NULL.
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
* Add TODO in struct unicode_cpt_flags to reimplement it in endian-independent way
* Update URL for big-endian model
* Update .github/workflows/build.yml
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@scala.com>
* Update remaining mentions of BE models to ggml-org/models repo
---------
Signed-off-by: Aaron Teo <aaron.teo1@ibm.com>
Co-authored-by: Aleksei Nikiforov <aleksei.nikiforov@linux.ibm.com>
Co-authored-by: Aleksei Nikiforov <103434461+AlekseiNikiforovIBM@users.noreply.github.com>
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@scala.com>
This commit adds support for passing a prompt file to the model
conversion targets/scripts. It also updates the logits.cpp to print out
embedding information in the same format as when running the original
embedding model.
The motivation for this is that it allows us to pass files of different
sizes when running the converted models and validating the logits.
This can be particularly important when testing the sliding window
functionality of models where the sequence length needs to exceed a
certain number of tokens to trigger the sliding window logic.
* feat: Extra debugging support for model conversion - added BF16 support for llama-callback-eval and support for dumping intermediate steps in run-org-model.py
* gguf: split gguf writer into base and buf impl
* gguf: templated gguf write out
* gguf: file based writer (avoid writing everything to memory first!)
* examples(llama2c): fix log not being the same level and compiler nits
This commit updates the modelcard.template file used in the model
conversion scripts for embedding models to include the llama-server
--embeddings flag in the recommended command to run the model.
The motivation for this change was that when using the model-conversion
"tool" to upload the EmbeddingGemma models to Hugging Face this flag was
missing and the embedding endpoint was there for not available when
copy&pasting the command.
* model-conversion : remove hardcoded /bin/bash shebangs [no ci]
This commit updates the bash scripts to use env instead of using
hardcoded /bin/bash in the shebang line.
The motivation for this is that some systems may have bash installed
in a different location, and using /usr/bin/env bash ensures that
the script will use the first bash interpreter found in the user's
PATH, making the scripts more portable across different environments.
* model-conversion : rename script to .py [no ci]
This commit renames run-casual-gen-embeddings-org.sh to
run-casual-gen-embeddings-org.py to reflect its Python nature.
This commit adds a curl script to the model-conversion examples
which is currently missing. This script is required for the running the
embedding server targets to test llama-server embeddings functionality.
* sampling : optimize sorting using bucket sort in more places
ggml-ci
* sampling : do not sort in dist sampler
ggml-ci
* sampling : avoid heap allocations for sort buffers
ggml-ci
* common : add option to sort sampling candidates by probability
ggml-ci
* sampling : revert the change for preserving sort buffers
* sampling : use std::copy instead of memcpy
* sampling : clarify purpose of partial sort helpers
ggml-ci
* cont : remove wrong comment [no ci]
* common : update comment
Co-authored-by: Johannes Gäßler <johannesg@5d6.de>
---------
Co-authored-by: Johannes Gäßler <johannesg@5d6.de>
This commit adds a new target to the Makefile for converting models that
are multimodal. This target will convert the original model and in
addition also create the mmproj GGUF model.
The motivation for this change is that for models that are multimodal,
for example those that contain a vision encoders, we will often want to
upload both the quantized model and the vision encoder model to
HuggingFace.
Example usage:
```console
$ make causal-convert-mm-model MODEL_PATH=~/work/ai/models/gemma-3-4b-it-qat-q4_0-unquantized/
...
The environment variable CONVERTED_MODEL can be set to this path using:
export CONVERTED_MODEL=/home/danbev/work/ai/llama.cpp/models/gemma-3-4b-it-qat-q4_0-unquantized.gguf
The mmproj model was created in /home/danbev/work/ai/llama.cpp/models/mmproj-gemma-3-4b-it-qat-q4_0-unquantized.gguf
```
The converted original model can then be quantized, and after that both
the quantized model and the mmproj file can then be uploaded to
HuggingFace.
Refs: https://huggingface.co/ggml-org/gemma-3-4b-it-qat-GGUF/tree/main
This commit adds two targets to the Makefile for quantizing of
Quantization Aware Trained (QAT) models to Q4_0 format.
The motivation for this is that this sets the token embedding and the
output tensors data types to Q8_0 instead of the default Q6_K. This is
someting that we wish to enforce for QAT Q4_0 models that are to be
uploaded to ggml-org on Huggingface to guarantee the best quality.
This commit explicitly sets the pooling type to 'none' in the logits.cpp
to support models that have a pooling type specified.
The motivation for this is that some models may have a pooling type set
in the model file (.gguf file) and for this specific case where we only
want to extract logits, we need to ensure that no pooling is used to
so that we are comparing raw logits and not pooled embeddings.
* model-conversion: add model card template for embeddings [no ci]
This commit adds a separate model card template (model repository
README.md template) for embedding models.
The motivation for this is that there server command for the embedding
model is a little different and some addition information can be useful
in the model card for embedding models which might not be directly
relevant for causal models.
* squash! model-conversion: add model card template for embeddings [no ci]
Fix pyright lint error.
* remove --pooling override and clarify embd_normalize usage
Georgi Gerganov
Oliver Simons
Daniel Bevenius
Igor Smirnov
Neo Zhang
Diego Devesa
Piotr Wilkin (ilintar)
william pan
Gabe Goodhart
Sam Malayek
Aldehir Rojas
Aaron Teo
Douglas Hanley
Jie Fu (傅杰)
GideonSerf
Aman Gupta
Erik Scholz
Johannes Gäßler