This pattern appears in a lot of models, the rope operation is applied right
before storing into the KV cache (usually on the K tensor).
Add a path to some of the rope shaders that computes the destination address
based on the set_rows tensor. Compile variants of the shader with D_TYPE of
f16 (the usual KV cache type).
Add a src3 operand to ggml_vk_op_f32 - sometimes rope uses three srcs and needs
the fourth for the row indices.
Add fused_ops_write_mask to indicate which intermediate tensors need to write
their results to memory. Skipping writing the roped K value helps to allow more
nodes to run concurrently.
Add logic to ggml_vk_graph_optimize to make ROPE+VIEW+SET_ROWS consecutive. It
rarely starts out that way in the graph.
Add new backend tests.
* ggml : fix interpolate with align-corners and ne=1
* avoid division by zero if one of the spatial dimensions is 1
* cpu, cuda, opencl returned correct result anyway due to clamp
* vulkan didn't clamp for align-corners so results were broken
* fix clang warning
* SYCL: Add support for FLOOR,CEIL,ROUND and TRUNC unary operators
Clean up unrelated changes from previous commit
* Chore: remove empty lines and fix indentation
* Clean up: remove leftover blank lines and fix spacing
* chore: fix trailing whitespace and ensure final newline
* Cleanup: remove redundant declarations already defined in header
* Sync docs/ops.md with updated backend operation support
* docs: update ops.md after rebase
* docs: update ops.md - Vulkan supports SSM_CONV and SSM_SCAN
* opencl: add mm_q8_0_f32
* opencl: fix data loading for incomplete tile
* opencl: use q8_0 mm for larger matrix
* opencl: add some tests to cover the path
* optimise GGML_OP_SUM
* add non-contiguous tests by permuting the input
* change tests to require full contiguity of OP_SUM
* cuda : add check GGML_OP_SUM
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* metal : pad K, V and Mask when needed
* cont : simplify
* cuda : add TODO about KV padding requirement
* metal : add comments
* metal : remove mask padding requirement
* tests : add -INF blocks to the KQ mask in the FA tests
* cont : bump -INF block size to 64
Co-authored-by: Jeff Bolz <jbolz@nvidia.com>
* ggml : prevent division by zero in FA CPU op
---------
Co-authored-by: Jeff Bolz <jbolz@nvidia.com>
* Work on rope
* Simplify inplace operation generation and combine mul/add generation
* Work on rope variants
* implement neox rope
* rope complete
* Add sub,div,glu operators
* implement scale op
* Update cpy shader to handle cont/more types
* formatting
* Update test vars printing for rope,rms_norm
* Avoid ROPE hardcoded constants
* Add TODO to change ROPE constants to enum
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* fix TODO comment
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* vulkan: 64-bit im2col
Add variants of the im2col shaders that use buffer_device_address/buffer_reference,
and use 64-bit address calculations. This is needed for large convolutions used in
stable-diffusion.cpp.
* fix validation error for large im2col
* metal : support mul_mm with src1->type == GGML_TYPE_F16
* metal : support mul_mm_id with src1->type == GGML_TYPE_F16
[no ci]
* metal : mul_mm support ne00 % 32 != 0
* metal : support mul_mm_id with ne00 % 32 != 0
* cont : remove unnecessary unrolls
* cont : simplify data loading
* metal : optimize mul_mm when output bounds checks are not needed
* vulkan: handle mat_mul with A matrix > 4GB
This change splits mat_mul operations with huge A matrix into chunks in the M
dimension. This works well for stable-diffusion use cases where the im2col
matrix has very large M.
Fix the order of setting the stride in mul_mm_cm2 - setting the dimension
clobbers the stride, so stride should be set after.
* build fixes
* CUDA: mul_mat_id for mmf for bs <= 64 for f16 and bs <= 32 for f32
This commit adds mul_mat_id support for ncols_dst >= 16. It does this by
packing ncols_dst tiles into the blockDim.y.
My tests on a RTX 3090 show that this is faster than the cuBLAS fallback
for f16 till bs=64, and for f32 till bs=32
* Review: refactor if statement
* CUDA: add a fused top-K MoE kernel
This kernel does the following:
1. softmax over the logits per token [n_experts, n_tokens]
2. argmax reduce over the top-k (n_experts_used) logits
3. write weights + ids to global memory
It is intended as fusion of softmax->top-k->get_rows pipeline for MoE models
* Refactor into ggml_cuda_should_use_topk_moe
* Review: Use better coalescing pattern, use WARP_SIZE, store logits into registers before
* Review: format + micro-optimizations
* Fix bug: fix tie breakers
* Add optional norm + clean-up code
* Use smem for final write
* Add bounds check
* Use better memory pattern for writeback
* implement set_rows with i32 index
* template fix
* test quantized path
warnings--
* Apply suggestions from code review
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* forgotten name change
* deduplicate cuda/sycl and test-fix
* indent++
* vulkan: support set_rows with i32 index type (#16162)
* disable i32 index for webgpu for now
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
Co-authored-by: Jeff Bolz <jbolz@nvidia.com>
* Vulkan: add conv_transpose_2d operation
* Vulkan: fix typo in conv_transpose_2d shader(s0mp, s0L, s1mp, s1L)
* Vulkan: fix incorrect indentation in conv_transpose_2d shader
* Vulkan: add checking the push constants size limit and reuse conv2d_mm.comp for conv_transpose_2d operation
* Vulkan: revert the order of the index calculation and bound check in conv_2d shader
* Vulkan: explicity check push constants limit in supports_op() for conv_transpose_2d operation.
* Vulkan: remove unnecessary lower bound checks for H/W_idx in the conv_2d shader.
* CUDA: Optimize PAD_REFLECT_1D
feat: add more test cases for PAD_REFLECT_1D
* use fast_div to improve performance
* Apply suggestion from JohannesGaessler
Co-authored-by: Johannes Gäßler <johannesg@5d6.de>
* Apply suggestion from JohannesGaessler
Co-authored-by: Johannes Gäßler <johannesg@5d6.de>
* optimize
* use a concise expression to further speedup the cuda kernel
---------
Co-authored-by: Johannes Gäßler <johannesg@5d6.de>
* Add paramater buffer pool, batching of submissions, refactor command building/submission
* Add header for linux builds
* Free staged parameter buffers at once
* Format with clang-format
* Fix thread-safe implementation
* Use device implicit synchronization
* Update workflow to use custom release
* Remove testing branch workflow
* some f32 tests passing
* Disable set_rows until it's implemented
* f32 add all tests passing
* Begin work on set_rows
* Work on set rows
* Add error buffers for reporting unsupported SET_ROWS indices
* Remove extra comments
* Add templated addition, clean up code
* Get addition and multiplication working
* Implement rms_norm
* Add get_rows implementation
* Add new get_rows files
* Refactor use of wg size entry
* Fix compilation
* Try manually unrolled q4_0 quant
* Revert "Try manually unrolled q4_0 quant"
This reverts commit 77f8b96515.
* Move to constant max wg size
* Check for tensor size in supports_op
* Vectorize f32 and change default workgroup size
* Move f32 get_rows from < 4 to % 4 != 0
* fix linter errors
* Add in-place tests
---------
Co-authored-by: Neha Abbas <nehaabbas@ReeseLevines-MacBook-Pro.local>
* metal : improve naming
* metal : refactor device
ggml-ci
* cont : props
ggml-ci
* metal : apply ggml_mem_ranges_t
ggml-ci
* metal : remove GGML_METAL_USE_BF16
ggml-ci
* metal : refactor device buffer
ggml-ci
* cont : fix naming
* metal : sync before destroying the backend
ggml-ci
* metal : refactor context
ggml-ci
* metal : migrate ggml-metal.m to ggml-metal.cpp
ggml-ci
* metal : adjust ops API
ggml-ci
* metal : use C++ to store piplienes
ggml-ci
* metal : migrate ops to separate functions
ggml-ci
* metal : add ggml_metal_library_t
ggml-ci
* metal : improve naming
ggml-ci
* metal : cleanp
ggml-ci
* metal : add support for GGML_OP_LOG
ggml-ci
* metal : fix error handling
ggml-ci
* Add fastdiv and fastmodulo to k_bin_bcast kernel
* Address review comments
* `prod_` instead of `prod` suffix
* Add test case for `k_bin_bcast_unravel` in CUDA backend
* CUDA: Add mul_mat_id support the mmf
Add support for mul_mat_id for bs < 16
* Review: use warp_size, fix should_use_mmf condition
* Launch one block per expert, stride along n_expert_used
* templatize mul_mat_id
* Pad shmem to 16 bytes, add helper function mul_mat_f_switch_ids
* Reduce compile times by dividing mmf into f16, bf16 and f32 variants
* Divide mmf by ncols_dst
* Add missing files
* Fix MUSA/HIP builds
* ggml: allow casting between f32 and i32
* fix cuda
* add vulkan
* fix CPU non-cont
* add non-cont test case
* add note
* extend test number range
* correct note
* add cont version for vulkan
This commit adds two new command-line options to the
test-backend-ops.cpp that allow users to list all available GGML
operations and to show test coverage of these operations.
The motivation for this is that it can be useful to quickly see which
operations are currently covered by tests and which are not. Also it
migth be useful when using the `support` mode.
* metal : mul_mm_id remove hdst
* metal : remove mul_mm_id hsrc1
* metal : mul_mm_id simplify + add test
* metal : opt mul_mm_id map0
* metal : optimize mul_mm_id id gathering
* metal : mul/div opt
* metal : optimize mul_mm_id_map0
ggml-ci
Jeff Bolz
Acly
Aman Gupta
leejet
safranowith
Ilia Ilmer
lhez
Sam/Samuel
Georgi Gerganov
Reese Levine
Sigbjørn Skjæret
Shin-myoung-serp
Ruben Ortlam
Xuan-Son Nguyen
Bowen Han
Oliver Simons
Daniel Bevenius
rmatif
Eve