* tests : fix fetch_server_test_models.py
* server: to_json_oaicompat cached_tokens
Adds OpenAI and Anthropic compatible information about the
number of cached prompt tokens used in a response.
* migrate(vtcm): unify VTCM management for HMX merge
- Add HMX fields to htp_context (#ifdef HTP_HAS_HMX): hmx_enabled,
hmx_dma, vtcm_scratch_size, exp2_table
- Add HTP_VTCM_SESSION_HOLD CMake option (default ON): hold VTCM for
entire session instead of per-op acquire/release
- Add vtcm_op_acquire/vtcm_op_release inline wrappers: no-op in
session-hold mode, delegate in per-op mode
- Add VTCM tail reservation for precompute tables (256KB, 64KB aligned)
in htp_iface_start under HTP_HAS_HMX
- Add HMX init/cleanup hooks in htp_iface_start/stop
- Add precompute table recovery in vtcm_acquire after VTCM preemption
- Do NOT migrate vtcm_mgr from htp-ops-lib (replaced by tail reservation)
* migrate(repack): replace x4x2 with HMX tile-permuted super-block format
- Add hmx_block_q4_0/q8_0 struct definitions (scales-first + sequential quants)
- Implement forward repack: repack_q4_0_to_hmx_superblock, repack_q8_0_to_hmx_superblock, repack_f16_to_tile_permuted
- Implement inverse repack for get_tensor debug verification
- Route set_tensor/get_tensor via opt_arch >= 73 to HMX path, else existing HVX x4x2
- MXFP4 on v73+ falls back to HVX x4x2 repack (not memcpy)
- Extend supports_op: add IQ4_NL for v73+, F16 tile alignment checks
- Tail blocks (K not multiple of 256): repack to x4x2 via pad-repack-truncate
- Add CMake GGML_HEXAGON_HMX_TAIL_HVX option (default ON); OFF rejects non-256-aligned K in supports_op
* migrate(dma): add dma_queue_push_1d() convenience wrapper for HMX ops
Add 1D linear DMA transfer helper to hex-dma.h for upcoming HMX op
migration. Reuses existing dma_queue_flush() for sync points instead
of adding redundant dma_queue_drain().
* migrate(hmx): reorganize HMX files into htp/hmx/ and simplify HMX locking
Move all 14 HMX-related files from htp/ to htp/hmx/ subdirectory for
cleaner separation between HVX and HMX code. Simplify HMX hardware
locking by replacing the two-level lock design (SHARED HAP lock +
custom asm spin-lock) with direct HAP_compute_res_hmx_lock/unlock
on the existing vtcm_rctx, which already has HMX capability.
Key changes:
- Create htp/hmx/ subdirectory with all HMX infrastructure and ops
- Replace hmx_mgr_ctx_id + spin-lock with HAP_compute_res_hmx_lock(vtcm_rctx)
- Remove hmx_manager_enable/disable_execution() (SHARED lock no longer needed)
- Add hmx_set_vtcm_state() call in main.c (was missing, caused null globals)
- Update main.c includes to use hmx/ prefix
- Clean up duplicate declarations from hmx-worker-pool.h
* migrate(hmx-infra): consolidate HMX infrastructure into htp_context
- Remove hmx-mgr.c/h: eliminate global HMX state singleton, thread htp_context through all HMX ops
- Remove hmx-worker-pool.c/h: replace separate HMX worker pool with main worker_pool API (worker_pool_run_func)
- Replace hmx_unit_acquire/release with direct HAP_compute_res_hmx_lock/unlock on ctx->vtcm_rctx
- Remove HTP_VTCM_SESSION_HOLD compile option: always use per-op vtcm_acquire/release
- Remove hmx_dma from htp_context: HMX ops use ctx->dma[0] instead of separate DMA queue
- Simplify main.c init/cleanup: remove hmx_manager_setup/reset and vtcm_op_acquire/release wrappers
- Delete upstream llama.cpp AGENTS.md (not applicable to fork)
* migrate(flash-attn): remove HTP_EXP2_TABLE_COPIES, use single exp2 table
- Remove HTP_EXP2_TABLE_COPIES compile definition and CMake cache variable
- Remove table duplication loop in precompute-table.c
- Remove worker_index % N sub-table indexing in hmx-flash-attn-ops.c
- Fix table_size to 65536 (single 64 KB copy) in main.c
The exp2 lookup table is read-only; concurrent VTCM reads do not cause
bank conflicts, so duplicating the table wastes 192 KB of VTCM for no
benefit.
* migrate(dsp-main): add HMX priority dispatch in packet_callback
- Add proc_hmx_matmul_req() wrapper for HMX mat_mul (F16 and quantized types)
- Add proc_hmx_flash_attn_req() wrapper for HMX simple_flash_attn (FP16 only, falls back to HVX for non-FP16)
- Add proc_hmx_rms_norm_req() wrapper using hvx_rms_norm_f32
- Route MUL_MAT, FLASH_ATTN_EXT, RMS_NORM through HMX path when ctx->hmx_enabled
- Split RMS_NORM and SCALE into separate case blocks for independent dispatch
- All HMX wrappers guarded by #ifdef HTP_HAS_HMX
* migrate(cmake-dsp): add HMX source files and -mhmx for v73+ skels
Add HTP_VTCM_SESSION_HOLD option (default ON) and v73+ HMX build
integration: compile hmx-matmul-ops, hmx-flash-attn-ops,
hmx-rms-norm-ops and precompute-table into v73/v75/v79/v81 skels
with -mhmx flag and HTP_HAS_HMX=1 definition. v68/v69 skels remain
unchanged.
* migrate(hmx-ops): fix compile errors in HMX ops for ggml struct compatibility
- hmx-matmul-ops.c: include ggml-common.h for block_q4_0/block_q8_0 definitions
- hmx-matmul-ops.c: rename quants->qs, scale->d to match upstream ggml field names
- hmx-flash-attn-ops.c: suppress -Wunused-function/-Wunused-variable warnings
- hmx-flash-attn-ops.c: inline ctx->n_threads, remove unused n_workers variable
* hmx: set Q/O element type to fp16 for flash attention
The llama.cpp integration passes fp16 Q/O tensors, so qo_fp32_element
should be false to match the actual data layout.
* hexagon: unify HMX weight format to x4x2, add IQ4_NL and DSP-side fallback
Remove the v73+ HMX-specific super-block/tile-permuted weight format
and unify all architectures on the HVX x4x2 packed format. The DSP now
decides at runtime whether to use the HMX or HVX matmul path based on
dimension constraints (M%32, N%32, K%256 alignment), rather than the
host rejecting ops in supports_op. This simplifies the host repack
logic, eliminates ~400 lines of HMX super-block code, and adds IQ4_NL
quantization support across host and DSP.
Key changes:
- Remove hmx_block_q4_0/q8_0 types, repack functions, and F16 tile
permutation (ggml-hexagon.cpp, hmx-quants.h)
- Simplify set_tensor/get_tensor to always use x4x2 repack, add IQ4_NL
- Force is_host=false so tensor copies go through format conversion
- Add HTP_TYPE_IQ4_NL to DSP message protocol (htp-msg.h)
- Rewrite DSP dequantizers to work directly on x4x2 layout
(hmx-matmul-ops.c)
- Fix mxclracc.hf placement: clear per output tile, not once globally
- Move HMX eligibility checks to DSP proc_hmx_matmul_req (main.c)
- Remove dma_queue_push_1d wrapper, use 2D DMA for weight sub-blocks
- Add VTCM allocation overflow asserts
- Remove GGML_HEXAGON_HMX_TAIL_HVX build option (CMakeLists.txt)
* Enhance HMX debugging capabilities with new tile dumping functions
- Introduced hmx_dump_tile_mem and hmx_dump_fp32_tile_region for improved memory layout visualization of tile data.
- Updated hmx_dump_tile_rows to provide raw memory output for debugging.
- Added debug logging for activation and weight tile pairs during processing to facilitate troubleshooting.
- Refined existing macros for dumping HVX vector values to streamline debugging output.
These changes aim to enhance the debugging experience for HMX matmul operations, ensuring better visibility into data handling and transformations.
* OK for small mat mul
* hexagon: fix UDMA roiwidth 16-bit overflow in HMX matmul DMA transfers
The UDMA descriptor roiwidth field is 16-bit (max 65535), but large matrix
DMA transfers (e.g. 32×2304 = 73728 bytes) exceeded this limit, causing
truncated transfers and NaN results. Fix by using 2D DMA (per-row stride ×
n_rows) instead of 1D (total_size × 1) for all 4 DMA push calls in both
x4x2 and fp16 weight paths.
Also includes:
- Use standard vlut16 instead of _nomatch variant for dequantization
- Add per-tile vscatter drain barrier for correctness
- Add compile-time HMX_DEBUG_TRACE_VALUES instrumentation (disabled by default)
* hexagon: remove HMX RMS norm fallback and re-enable matmul pipeline
Remove hmx-rms-norm-ops.c as the HVX RMS norm offers no benefit over
the generic unary path. Re-enable DMA pipeline mode for QK matmul.
* hexagon: guard all HMX matmul DMA transfers against UDMA 16-bit field overflow
All UDMA type1 descriptor fields (roiwidth, roiheight, srcstride, dststride)
are 16-bit (max 65535). Commit 40d2a9cc fixed roiwidth overflow in the
non-pipeline path by switching from 1D to 2D DMA, but the pipeline path
(3 call sites) was left unchanged and still used 1D DMA with
chunk_size = n_cols * row_stride as roiwidth, which overflows for any
practical matrix size when the pipeline is active.
Add a local hmx_dma_push_safe() helper that transparently handles overflow:
- Fast path (zero overhead): all params fit in 16 bits -> direct call.
- Contiguous block: reshapes into a single 2D descriptor with sub_width
that fits in 16 bits, preserving async DMA behavior.
- Stride overflow: row-by-row fallback for future large-k models where
per-row stride itself exceeds 65535.
Convert all 8 external dma_queue_push calls in hmx-matmul-ops.c to use
the safe helper, including the 3 pipeline sites (1D -> 2D fix), the
FP16 and x4x2 weight paths, qweight_fetch sub-block DMA, and the
output-stationary activation fetch.
* hexagon: multithread activation/output transfer and add HMX matmul fallback
- Replace single-threaded transfer_activation_chunk_fp32_to_fp16 with
transfer_activation_chunk_multithread across all HMX matmul paths
- Add multi-threaded transfer_output_chunk_multithread for FP16-to-FP32
output store, following the same worker pool pattern
- Rename transfer_activation_chunk_no_prefetch back to
transfer_activation_chunk_fp32_to_fp16 and clean up stale comments
- Add HVX fallback in proc_hmx_matmul_req when HMX matmul returns error
* [todo]: dynamic alloc vtcm, cause prefill regression.
* hexagon: constrain HMX mxmem tile load region to avoid VTCM bank boundary faults
Set activation/weight mxmem Rt to 2047 for single-tile loads and document the 4MB VTCM bank boundary constraint, preventing precise bus errors when dynamic VTCM allocation places tiles near bank edges.
* hexagon: split unaligned-M HMX matmul into HMX+HVX phases
- keep HMX for the 32-aligned head rows and process tail rows with HVX
- force re-quantization for HVX tail after HMX phase to avoid stale VTCM state
- preserve fallback behavior when N is unaligned or no aligned M rows exist
* hexagon: batch-4 Q4_0 dequantize fast path and remove debug traces
Add dequantize_x4x2_q4_0_x4groups_hvx() that processes 4 contiguous
K-tiles with a single vmemu + vlut16 per row, reducing per-tile overhead.
The dequantize loop now takes the batch-4 path when 4 aligned K-tiles
are available within the same column tile, falling back to the original
single-tile path otherwise.
Also removes HMX_DEBUG_TRACE_VALUES instrumentation blocks that are no
longer needed.
* hexagon: abort on DSP error and fix HMX-to-HVX fallback quantize flag
Promote DSP response error from log to GGML_ABORT for fail-fast
behavior. Clear SKIP_QUANTIZE flag when falling back from HMX to HVX
matmul so the HVX path correctly re-quantizes activations.
* hexagon: support batch matmul. This fix perplexity issue
The problem comes from Grouped-Query Attention(GQA). Strides between batches are not well respected
TODO: optimize batch matmul to reuse weights between batches.
* hexagon: reuse weights in fp16 batch matmul
* hexagon: remove unused HMX flash attention operations and precomputation table, remove the log system for test
* hexagon: remove unused HVX math helpers, debug infrastructure, and stale build options
* hexagon: fix HMX not enabled due to missing force_hvx parameter in IDL
* hexagon: remove the unnecessary changes not related to HMX
* hexagon: bypass HMX by default
* hexagon: add upstream repo link to htp-ops-lib ported file headers
* hexagon: restore host buffer support
* hexagon: add HMX=1 option for the adb scripts
* hex-hmx: improve DMA pipelining
* hex-hmx: further improvements to dma pipelining
* hex-hmx: minor cleanup
* hex-hmx: move hmx lock out of inner loops/calls
* hex-hmx: remove unnecessary state and wrappers
* hex-hmx: remove hmx dir and unify f32 to f16 conversions
* hex-hmx: further unify hvx conversions
* hex-hmx: revert f16 converter to the original for now
* hex-hmx: minor cleanup for f16 to f32 converter
* hex-mm: replace incorrect fp16-to-fp32 hmx converter and reformated related code
* hex-dma: move chanied dma push into hex-dma.h header and update hmx-mm
* hex-mm: use hex_is_aligned instead of a duplicated hmx_is_aligned
* hex-mm: use hvx_vec_splat_f16 in the hmx code
* hex-mm: use VLEN and HTP types in hmx-code
* hex-mm: remove duplicate QK and defs
* hexagon: pre-shuffle quants before vlut16
* hexagon: enable HMX by default
* hex-mm: code indent fixes for hmx-matmul
* hexagon: update hex-utils to include align/smin/etc helpers and use that in hmx mm
* hex-mm: more formatting fixes
* hex-mm: minor naming updates in hmx code
* hex-mm: remove leftover from rebase conflict
* Fix the incorrect indents
---------
Co-authored-by: Max Krasnyansky <maxk@qti.qualcomm.com>
* webui: make server the source of truth for sampling defaults
* webui: fix Custom badge for sampling parameters
* webui: log user overrides after server sync
* chore: update webui build output
* fix: Default values for sampling settings config object
* chore: update webui build output
---------
Co-authored-by: Aleksander Grygier <aleksander.grygier@gmail.com>
* add tests for model id parser
* add test case having activated params
* add structured tests for model id parser
* add ToDo
* feat: Improve model parsing logic + tests
* chore: update webui build output
---------
Co-authored-by: bluemoehre <bluemoehre@gmx.de>
* convert : support is_causal hyperparameter
Check for the `is_causal` attribute in the Hugging Face model configuration and include it in the GGUF metadata.
* Update convert_hf_to_gguf.py
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@scala.com>
* style: fix F541 f-string is missing placeholders
---------
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@scala.com>
RotaryPositionEmbedding on CANN fails when src and dst share the same
non-contiguous buffer (inplace + view), because the operator overwrites
source data before it is fully read.
Add a branch that detects this case and uses contiguous temporary
buffers: copy src to temp, run ROPE into another temp, then copy back
to the non-contiguous dst. Fixes 20 failing ROPE tests (f32, v=1,
inplace=1).
Signed-off-by: noemotiovon <757486878@qq.com>
- Allow FLASH_ATTN_EXT when head dimension D is not a multiple of 16 by
padding Q/K/V to D_padded = GGML_PAD(D, 16), running FusedInferAttentionScoreV2,
then slicing the output back to D (ggml-cann.cpp + aclnn_ops.cpp).
- Fix aclnn_get_slope second-part offset: use ggml_type_size(dtype) instead of
sizeof(float) so ALiBi slopes are correct when dtype is F16 (e.g. GQA with
48 heads); fixes buffer overflow and large numerical errors in those cases.
* Add control vector functions to qwen3.5 and qwen-next models
* Add missing cvec compatibility to the rest of the models
* Adjust comments and formatting
* cleanup
* whitespace
---------
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@scala.com>
* Fix errors occurring on Windows
* Reverted fix
#20365 will take care of CRLF isue
* Changed to write to directly to stdin
* Prevent fclose to happen twice
Add element-wise unary ops needed by Qwen 3.5's DeltaNet linear
attention layers. These ops follow the existing unary-ops pattern
with VTCM DMA double-buffering.
- neg: negate via scale by -1.0
- exp: uses existing hvx_exp_f32 HVX intrinsics
- sigmoid: uses existing hvx_sigmoid_f32_aa HVX intrinsics
- softplus: log(1 + exp(x)) scalar fallback
- CONT reuses the existing CPY infrastructure since making a tensor
contiguous is equivalent to a same-type copy.
- REPEAT implements tiled memory copy with multi-threaded execution via
the worker pool, supporting f32 and f16 types. The kernel parallelizes
across output rows and uses memcpy for each tile.
Co-authored-by: Max Krasnyansky <maxk@qti.qualcomm.com>
Tomeamis
Sundaram krishnan
Georgi Gerganov
Rail Chabdarov
Ryan Goulden
James O'Leary
Yiwei Shao
uvos
Piotr Wilkin (ilintar)
Reese Levine
ddh0
Pascal
Xuan-Son Nguyen
Aleksander Grygier
Dowon
Aldehir Rojas
Eve
Charles Xu
Sigbjørn Skjæret
Kevin Hannon
Chenguang Li
Masashi Yoshimura
Michael Grau
crsawyer
Shaw Nguyen
Julien Chaumond
Pop Flamingo
Masato Nakasaka
Aaron Teo
Andreas Obersteiner
Krishna Sridhar
Ruben Ortlam
Taimur Ahmad