This commit removes the `--backend-dist` option and instead uses the
configured --samplers chain to determine which samplers run on the
backend.
Backend sampling is still enabled using With `--backend_sampling`, and
the sampler chain, either explictly specified using `--samplers` or the
default, is automatically analyzed to determine which samplers can run
on the backend. The system finds the longest contiguous chain of
backend supported samplers from the start of the sampler sequence.
For example:
* If the chain is `top-k -> temperature -> top-p`, and both `top-k` and
`temperature` are backend-supported but `top-p` is not, then `top-k`
and `temperature` will run on the backend, while `top-p` and
subsequent samplers run on the CPU.
* If all configured samplers are supported, the final distribution
sampling will also happen on the backend, transferring only the
sampled token IDs back to the host.
* If the sampler chain starts with an unsupported sampler (e.g.,
`penalties`), all sampling runs on the CPU. Note that this is
currently the case with the default sampler so to use backend sampling
it is required to specify a sampler chain. See below for an example.
The following shows how llama-cli can be run with backend sampling:
```console
$ llama-cli -m models/Qwen2.5-VL-3B-Instruct-Q8_0.gguf \
--prompt 'What is the capital of Sweden?' \
-n 20 \
-no-cnv \
--verbose-prompt \
-ngl 40 \
--backend-sampling \
--samplers 'top_k;temperature'
```
In this case the all sampling will happen on the backend since both
`top_k` and `temperature` are supported backend samplers.
To enable a partial backend sampling (hybrid sampling), for example
running `top_k` and `temperature` on the backend and `typ_p` on the CPU
the following sampler chain could be specified:
```console
$ llama-cli -m models/Qwen2.5-VL-3B-Instruct-Q8_0.gguf \
--prompt 'What is the capital of Sweden?' \
-n 20 \
-no-cnv \
--verbose-prompt \
-ngl 40 \
--backend-sampling \
--samplers 'top_k;temperature;top_p'
```
If this looks good then I'll follow up with updates the llama-cli and
llama-server documentation to reflect these changes.
This commit adds support for performing sampling operations on the
backend (e.g. GPU) as part of the model computation graph.
The motivation for this feature is to enable sampling to be performed
directly on the backend as part of the computation graph being executed,
allowing for some or all of the sampling to be done on the backend.
For example, the backend sampler chain might select/sample a token
directly in which case only the sampled token needs to be transferred
from device memory to host memory.
It is also possible for the backend samplers to perform filtering of
the logits, or compute and filter the probability distribution, in
which case only the filtered logits or probabilites need to be
transferred back to system memory for further processing by CPU
samplers.
Currently the backend sampling works in a similar manner to how
pooling works, it is a function that is called by build_graph and the
sampler operations become part of the models computation graph.
* arg: add --cache-list argument to list cached models
* new manifest naming format
* improve naming
* Update common/arg.cpp
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* common: move download functions to download.(cpp|h)
* rm unused includes
* minor cleanup
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* Add --embd-output-format raw for plain numeric embedding output
This new option outputs embeddings as raw space-separated floats, without JSON or 'embedding N:' prefixes. Useful for downstream vector pipelines and scripting.
* Move raw output handling into format handling section
* Move raw output handling into else-if block with other format handlers
* Use LOG instead of printf for raw embedding output
* docs: document 'raw' embedding output format in arg.cpp and README
* Update the docs on -t --threads
* Revert "Update the docs on -t --threads"
This reverts commit eba97345e2.
* docs: clarify -t/--threads parameter uses CPU threads and defaults to all available cores
* Update arg.cpp
* minor : code style
* server : fix prompt similarity calculation
* server : initial host-memory prompt caching
* cont
* server : refactor
* cont
* cont : make the server task of the slot const
* cont : minor [no ci]
* server : cache prompts and checkpoints only for completion tasks
* server : improve prompt caching logic
* cont : fix check for number of cached prompts [no ci]
* server : improve caching logic, add -cram CLI arg
* server : print prompt mismatch info
* cont : better naming [no ci]
* server : improve prompt cache loading logic
* server : add option to debug the slot contents (#16482)
* server : add option to debug the slot contents
* Update tools/server/server.cpp
---------
Co-authored-by: Xuan-Son Nguyen <son@huggingface.co>
* server : add option to disable prompt cache
---------
Co-authored-by: Xuan-Son Nguyen <son@huggingface.co>
* refactor: unify reasoning handling via backend reasoning_content, drop frontend tag parsing
- Updated the chat message component to surface backend-supplied reasoning via message.thinking while showing the raw assistant content without inline tag scrubbing
- Simplified chat streaming to append content chunks directly, stream reasoning into the message model, and persist any partial reasoning when generation stops
- Refactored the chat service SSE handler to rely on server-provided reasoning_content, removing legacy <think> parsing logic
- Refreshed Storybook data and streaming flows to populate the thinking field explicitly for static and streaming assistant messages
* refactor: implement streaming-aware universal reasoning parser
Remove the streaming mode limitation from --reasoning-format by refactoring
try_parse_reasoning() to handle incremental parsing of <think> tags across
all formats.
- Rework try_parse_reasoning() to track whitespace, partial tags, and
multiple reasoning segments, allowing proper separation of reasoning_content
and content in streaming mode
- Parse reasoning tags before tool call handling in content-only and Llama 3.x
formats to ensure inline <think> blocks are captured correctly
- Change default reasoning_format from 'auto' to 'deepseek' for consistent
behavior
- Add 'deepseek-legacy' option to preserve old inline behavior when needed
- Update CLI help and documentation to reflect streaming support
- Add parser tests for inline <think>...</think> segments
The parser now continues processing content after </think> closes instead of
stopping, enabling proper message.reasoning_content and message.content
separation in both streaming and non-streaming modes.
Fixes the issue where streaming responses would dump everything (including
post-thinking content) into reasoning_content while leaving content empty.
* refactor: address review feedback from allozaur
- Passed the assistant message content directly to ChatMessageAssistant to drop the redundant derived state in the chat message component
- Simplified chat streaming updates by removing unused partial-thinking handling and persisting partial responses straight from currentResponse
- Refreshed the ChatMessage stories to cover standard and reasoning scenarios without the old THINK-tag parsing examples
Co-authored-by: Aleksander Grygier <aleksander.grygier@gmail.com>
* refactor: restore forced reasoning prefix to pass test-chat ([chat] All tests passed)
- store the exact sequence seen on input when 'thinking_forced_open' enforces a reasoning block
- inject this prefix before the first accumulated segment in 'reasoning_content', then clear it to avoid duplication
- repeat the capture on every new 'start_think' detection to properly handle partial/streaming flows
* refactor: address review feedback from ngxson
* debug: say goodbye to curl -N, hello one-click raw stream
- adds a new checkbox in the WebUI to display raw LLM output without backend parsing or frontend Markdown rendering
* Update tools/server/webui/src/lib/components/app/chat/ChatMessages/ChatMessage.svelte
Co-authored-by: Aleksander Grygier <aleksander.grygier@gmail.com>
* webui: add Storybook example for raw LLM output and scope reasoning format toggle per story
- Added a Storybook example that showcases the chat message component in raw LLM output mode with the provided trace sample
- Updated every ChatMessage story to toggle the disableReasoningFormat setting so the raw-output rendering remains scoped to its own example
* npm run format
* chat-parser: address review feedback from ngxson
Co-authored-by: Xuan Son Nguyen <thichthat@gmail.com>
---------
Co-authored-by: Aleksander Grygier <aleksander.grygier@gmail.com>
Co-authored-by: Xuan Son Nguyen <thichthat@gmail.com>
* implement --no-host to disable host buffer
* fix equal_mparams
* move no-host enumeration order together with other model params
---------
Co-authored-by: slaren <slarengh@gmail.com>
* rpc : add support for multiple devices
Allow rpc-server to expose multiple devices from a single endpoint.
Change RPC protocol to include device identifier where needed.
closes: #15210
* fixes
* use ggml_backend_reg_t
* address review comments
* fix llama-bench backend report
* address review comments, change device naming
* fix cmd order
* initial commit for branch 3
* generalize `swa_checkpoint` to `ctx_checkpoint`
this extends `llama-server`'s SWA checkpointing logic to include
hybrid/recurrent models such as Jamba, Granite
* oops
* disable debug prints
* keep backwards compat with `--swa-checkpoints`
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* update prompt re-processing message
* fix off-by-one error per GG
* keep `seq_rm` log per GG
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* server : fix checkpoint logic to support recurrent caches
* server : cleanup and fixes
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* common: introduce http.h for httplib-based client
This change moves cpp-httplib based URL parsing and client setup into
a new header `common/http.h`, and integrates it in `arg.cpp` and `run.cpp`.
It is an iteration towards removing libcurl, while intentionally
minimizing changes to existing code to guarantee the same behavior when
`LLAMA_CURL` is used.
Signed-off-by: Adrien Gallouët <angt@huggingface.co>
* tools : add missing WIN32_LEAN_AND_MEAN
Signed-off-by: Adrien Gallouët <adrien@gallouet.fr>
---------
Signed-off-by: Adrien Gallouët <angt@huggingface.co>
Signed-off-by: Adrien Gallouët <adrien@gallouet.fr>
`test-arg-parser.cpp` has been updated to work consistently,
regardless of whether CURL or SSL support is available, and
now always points to `ggml.ai`.
The previous timeout test has been removed, but it can be
added back by providing a dedicated URL under `ggml.ai`.
Signed-off-by: Adrien Gallouët <angt@huggingface.co>
The JSON parser is temporarily kept only for backward compatibility. It
reads the etag from old .json files to prevent unnecessary re-downloads
for existing users.
This legacy code can be removed in a future version.
Signed-off-by: Adrien Gallouët <angt@huggingface.co>
* vendor : update httplib
Signed-off-by: Adrien Gallouët <angt@huggingface.co>
* common : use cpp-httplib as a cURL alternative for downloads
The existing cURL implementation is intentionally left untouched to
prevent any regressions and to allow for safe, side-by-side testing by
toggling the `LLAMA_CURL` CMake option.
Signed-off-by: Adrien Gallouët <angt@huggingface.co>
* ggml : Bump to Windows 10
Signed-off-by: Adrien Gallouët <angt@huggingface.co>
---------
Signed-off-by: Adrien Gallouët <angt@huggingface.co>
* common : use the json parser
Signed-off-by: Adrien Gallouët <angt@huggingface.co>
* common : enable --offline mode without CURL support
This change refactors the download logic to properly support offline mode
even when the project is built without CURL.
Without this commit, using `--offline` would give the following error:
error: built without CURL, cannot download model from the internet
even if all the files are already cached.
Signed-off-by: Adrien Gallouët <angt@huggingface.co>
---------
Signed-off-by: Adrien Gallouët <angt@huggingface.co>
These two local variables 'arg' and 'arg_prefix' have been overriden by:
1. for (const auto & arg : opt.args)
2. for (int i = 1; i < argc; i++) {
const std::string arg_prefix = "--";
std::string arg = argv[i];
- Implement resumable downloads in common_download_file_single function
- Add detection of partial download files (.downloadInProgress)
- Check server support for HTTP Range requests via Accept-Ranges header
- Implement HTTP Range request with "bytes=<start>-" header
- Open files in append mode when resuming vs create mode for new downloads
Signed-off-by: Eric Curtin <eric.curtin@docker.com>
To pull and run models via: llama-server -dr gemma3
Add some validators and sanitizers for Docker Model urls and metadata
Signed-off-by: Eric Curtin <eric.curtin@docker.com>
* server : enable /slots by default and make it secure
ggml-ci
* server : fix tests to pass `--no-slots` when necessary
* server : extend /props with info about enabled endpoints
This commit updates the bash completion script to include the -m
short option for the --model argument.
The motivation for this is that currently tab completion only works the
full --model option, and it is nice to have it work for the short option
as well.
Georgi Gerganov
Aaron Teo
ddh0
Xuan-Son Nguyen
Daniel Bevenius
Sigbjørn Skjæret
Shagun Bera
Sam Malayek
takasurazeem
Pascal
Gadflyii
Radoslav Gerganov
ddh0
Adrien Gallouët
Adrien Gallouët
Haiyue Wang
Eric Curtin
jacekpoplawski
Aman Gupta
Diego Devesa
Eric Curtin
Eric Curtin
Johannes Gäßler
Jie Fu (傅杰)
Gian-Carlo Pascutto