diff --git a/Enable-802.11mc-FTM-on-Intel-8260.md b/Enable-802.11mc-FTM-on-Intel-8260.md
index 5248d8d..1dcc9c7 100644
--- a/Enable-802.11mc-FTM-on-Intel-8260.md
+++ b/Enable-802.11mc-FTM-on-Intel-8260.md
@@ -93,6 +93,51 @@ Further, you can check to see if `iw --help | grep FTM` gives you something like
 # 0x4. Get Result!
 ### AP side
 Simply enable HostAPd.
+
+Edit `/etc/init.d/hostapd`
+```
+sed -i 's/DAEMON_SBIN=/DAEMON_SBIN="\/usr\/local\/bin\/hostapd"\n# DAEMON_SBIN=/' /etc/init.d/hostapd
+sed -i 's/DAEMON_CONF=/DAEMON_CONF="\/etc\/hostapd\/hostapd.conf"\n# DAEMON_CONF=/' /etc/init.d/hostapd
+```
+
+Edit `/etc/network/if-pre-up.d/hostapd`:
+```
+sed -i 's/HOSTAPD_BIN=/HOSTAPD_BIN="\/usr\/local\/bin\/hostapd"\n# HOSTAPD_BIN=/' /etc/network/if-pre-up.d/hostapd
+```
+
+Edit `/etc/default/hostapd`:
+```
+sed -i 's/DAEMON_CONF=/DAEMON_CONF="\/etc\/hostapd\/hostapd.conf"\n# DAEMON_CONF=/' /etc/default/hostapd
+```
+
+Edit `/etc/network/interfaces`:
+```
+auto lo
+iface lo inet loopback
+auto wlp58s0
+iface wlp58s0 inet static
+  /usr/local/bin/hostapd /etc/hostapd/hostapd.conf
+  address 192.168.1.1
+  netmask 255.255.255.0
+```
+
+Edit `/etc/hostapd/hostapd.conf`
+```
+interface=wlp58s0
+driver=nl80211
+bssid=<mac address>
+ssid=sandlab_11mc_test
+hw_mode=g
+channel=1
+wmm_enabled=1
+wme_enabled=1
+ctrl_interface=/var/run/hostapd
+ctrl_interface_group=0
+ftm_responder=1
+ftm_initiator=1
+```
+
+
 ### Client side
 Note: you do not need to associate/connect to AP to get the measurement.